What Ceiling Height is Needed For a 2-Post Lift?


Before choosing a 2-post lift, consider the height of your ceiling. Normally, it's about 12' high. However, in some cases, you might need an extra two feet. In such cases, it's better to add 2' to the ceiling height. To known more visit this page


If you want to buy a two-post lift, you will need to make sure you have the required ceiling height. Generally, a two-post lift must be installed in a ceiling height of twelve feet or higher. For a larger lift, such as a four-post storage lift, you will need a higher ceiling height.

There are a few types of lifts available for your garage. The most affordable ones can work with an 8-10-foot ceiling, while a higher-end lift can require a ceiling height of 12 feet. However, it is important to be sure that you choose a lift that is ANSI certified so that you know that it meets strict safety standards.


When choosing the right two-post lift for your shop, make sure you choose a unit that's compatible with the ceiling height in your shop. Two-post lifts are popular for shops with low ceilings, and they can be used to lift cars, light trucks, and vans. Most models have a lifting capacity of up to 20,000 pounds. Two basic types of two-post lifts are available: symmetrical and asymmetrical. The symmetrical variety has two posts positioned directly across each other, while the asymmetrical style has one post offset from the other. Both designs are great for shops with low ceilings and low-width overall.

When buying a two-post lift, make sure to consider the ceiling height and the weight of the lift. Two-post lifts typically require a 12-foot clearance, while four-post lifts require a ceiling that's eight to 10 feet higher. Adaptable ceiling height for a 2 post lift is important for the safety and convenience of both the user and the shop.


When choosing a 2-post lift, it is important to consider your ceiling height. If the ceiling is below 12 feet, a baseplate version may be right for you. These lifts have steel baseplates and nine-foot-three-inch-tall columns. The lift's hydraulic hose and equalization cables are housed inside these columns. If your ceiling is above 12 feet, an overhead lift is needed. This lift features a bar that crosses the cables, leaving the floor clear. RTD two-post lifts come standard with 220V power units, but you can also choose 110-volt power units. This option can save you money on wiring costs.

A two-post lift is typically used for light trucks and most cars. There are two lifting posts underneath the vehicles. They can support a weight of up to 10,000 pounds. The price range for a two-post lift can range from $1,500 to $3,500, depending on the size of the vehicle. A four-post lift costs a bit more, at around $5,000.


There are a number of variables that determine the proper location to install a two-post lift. First, you must ensure that the ceiling height is correct. Then, you must allow for adequate clearance in front of columns. Then, you can proceed with installing the lift. You can also shim the columns to make sure that they are parallel.

After you have decided on the location and type of lift, you should carefully consider the dimensions of your shop. You should also consider the electrical service and the thickness of the concrete slab. It is important to purchase the right lift for the space you have in mind. Once you have determined the right size, you can begin the process of planning the installation.

To install a two-post lift, you must remove all packaging materials, such as boxes and plastic. You should then disconnect any cables that may be attached to the lift. You should also check the safety locks and hydraulic systems. Lastly, you should test the lift with a car that isn't too beloved. Make sure that the car settles evenly after the hydraulic pressure is released. If it does not, you may need to adjust the control cables.